Going Live with the new WebRTC CAM SYSTEM!

March 27th, 2021, 9:32 am

I know we still have an issue with the cam names showing up as "true"" sometimes. We are working on it.

We moved the whole voting database to a different server, to see if that improves things. The change was made on Thursday morning I believe, do you know if we've had voting errors Thursday and Friday? Could you let me know please? And send screencaps along with the exact time of the error and your ip address so that I can initiate a search for that IP to see the cause of the error? To look up your ip address just go to www.ipchicken.com

If you guys could do this will really help solve the problem.

WalterB · March 27th, 2021, 11:14 am

Moderators, please help with this. If someone complains about a voting issue, please write down the member name, the time and the IP address of the member. Send it to Vicky after the show. Thanks.

WalterB · March 27th, 2021, 2:55 pm

Do you have a VPN? If you do and it is logged in, you most likely have found that you can't log into a cam show with it on. You have to turn it off first.

This is an article I got from my security center. It might help you. Interesting to me was #4. It states that you can get a VPN with a 'bypass' feature. You can use the VPN for most. Then, when you go to a site you trust that won't work with the VPN, you can add it to a 'bypass' list (or something.) I have run across a few sites I can't access when my VPN is turned on. So this might be a really good idea.

https://tinyurl.com/yx97usvt

March 27th, 2021, 4:59 pm

Let me know what happens after you try it!

WalterB · March 27th, 2021, 5:20 pm

Well, I don't know about all of the VPN clients. The one I use is one of the (and sometimes, the)top-rated VPN available. But when I looked at Split-Tunneling, info was hard to find, and it seemed to indicate that it would open up one or all of the 4 browsers (Chrome, IE, FF and Edge.) To me, that seems to totally defeat the purpose in the first place by opening up everything.

I've written them a note and will follow up.

April 12th, 2021, 11:07 am

The boys in Poland are 100% sure they have solved the cam names showing g up as true! I didn't see any true in my show yesterday! Can you guys let me know if we can cross this one off the list?

They did swap out one hard drive that they thought was intermittently faulty (causing the voting connection tionerfpr.jmnot 100% convinced this is solved but there were no voting errors in my cam show yesterday.

April 14th, 2021, 2:05 pm

Another small victory! The IP addresses are now available to the moderators and can be copy/pasted! Still working on other stuff will keep you informed!

WalterB · April 14th, 2021, 2:15 pm

Seems to work fine. Thank you.

April 15th, 2021, 2:29 pm

NO voting errors for quite some time now? Whew! Do you think we got it?

WalterB · April 15th, 2021, 3:49 pm

I haven't seen any reports in a while. 10 days? 8?

April 18th, 2021, 7:53 pm

- The models screen name sometimes changes to another models name
-- Fixed

- Voting doesn't work randomly
-- Fixed

- Members on cam are named "true" on and off....
-- Fixed

- Website link doesn't always update from show to show.
-- Fixed

- Copy chat to clipboard doesn't work (models and moderators)
-- Copy to clipboard opens a new tab with fully formatted chat window for the most recent chat session. You can easily select all (CTRL or CMD+A) and copy-paste to any text editor.

- Can't copy the ip address of an offender, have to get pen and paper to write down, or open a word doc and type it in
-- Added "copy" icon in user lists rows.

- Members list on moderators view is whacky, doesn't update when members come and go, shows models logged in who haven't been on for hours...
-- Fixed

THEY FIXED A BUNCH OF STUFF AND BROKE MORE! AAAAHHHHHHGGGGGGGG HELP ME!
ONE DAY WE'LL HAVE EVERYTHING WORKING RIGHT AT THE SAME TIME, AND THAT WILL BE WHEN I'M 60 AND RETIRE!

WalterB · April 18th, 2021, 10:06 pm

That's how software works, lol. Thank you and your crew for all your efforts.

April 19th, 2021, 9:30 pm

I streamed for 3 hours today while the developers watched the back end of the server, not a single frame lost.... wtf.... all they can figure out is that it was some network outage somewhere on the internet over the weekend... such an unsatisfactory answer! Either that, or the number of cammers, hence the new message there today...

WalterB · April 19th, 2021, 9:32 pm

I"ve never tied the number of cammers to problems. But will try to start that.

Tonite, Daisy's show is going just fine. 6 members on cam.

April 20th, 2021, 11:01 am

Fine until it's not fine... lol.. of course she had to refresh after I stopped watching!

I'm turning off the member cams portion for the next 2 days - I want to isolate thie problem and prove if it's the members getting on cam that is the issue or not. If the shows run flawless for the next few days with member cams turned off, we'll know that is what needs to be fixed.

sorry for the inconvenience!

WalterB · April 20th, 2021, 3:15 pm

I'll be sure and remind folks. Other moderators? Don't forget to remind folks that cams aren't working.

April 21st, 2021, 10:21 am

For you techy people who may be interested...

Rita Daniels show yesterday had freezes, (with member cams on) and we were watching the server closely. Something caused the load on the server to spike up ridiculously, which is what causes the freeze. Normally during a camshow the load on the server is about 10% for a show like hers.... maybe 25-30% for me or Sara Jay with more users and more cammers..... we don't know what is causing the intermittent spikes..... so we installed more monitoring, and they are watching the backend during every show now to get the baselines, then we will turn the member cams back on, and see what exactly causes it. We will know granularly, the exact second that the spike occurred so can compare to what happened in the room at that time!

Kelley's show yesterday and Trinity's show today was fine, (member cams off), no freezes at all, no restarts, no refreshes.... I'll keep you posted...

April 26th, 2021, 2:18 pm

WE now know the strange electonic noise is being caused by the upgraded version of Ant Media! Why do they release things before they are ready? Did they not test it? Anyway, Ant Media knows about it, and will release a patch to fix it soon! Mystery solved!

https://github.com/ant-media/Ant-Media- ... ssues/3196

The good news is the member cams are back on! We'll watch and see. I'm feeling good about it!

I decided to have them on by default for the model and moderator, but off by default for the members. If anyone wants to turn on their cam or see the other member cams, they can just turn them on. It will save bandwidth this way, cause I'm sure a lot of people don't want to see them and don't really realize they can turn them off...

WalterB · April 27th, 2021, 7:20 am

All sounds good to me.

Members cams still don't seem to be "popping up" for the models. Monica and Shanda both had problems seeing members cams. Shanda discovered that maybe hers were turned off with the button. I don't know about Monica, but will remind the models to check if they can't see cams

mikesline · April 30th, 2021, 5:10 am

Hi vna Family ,hope everybody been good ,i been away for awhile ,trying to get out of california ,really hard no work and it still looks ugly for normal life to happen here in LA,. in normal times i work in studios through a union but movie biz is dead,they even left california,if all goes right ill be a floridian soon ,really missed the naughty fun with you all .i see the girls lookin delicious and ole guy n' zany still here ,we'll see ya soon ,.love n lust to ya all
mikey

Going Live with the new WebRTC CAM SYSTEM!

Login • Register